One-Touch Emergency Call
This feature permits you to dial an emergency number by a single key stroke, even in the “Phone Lock” or “Restrict” mode. This feature can be turned off to pre- vent unintentional calls to the emergency number.
See To Turn On/Off One-Touch Emergency Call Fea-
ture (F63) on page 85.
1.Press and hold 1 for more than 2 seconds. The number in emergency memory location “1” will be dialed.
2.Then the 
indicator will light, and the call will
be placed. (The factory preset number is “911”.) Note: This feature cannot be used if the Keypad Lock
is on. You need to dial all the digits and 
.
Emergency Call Mode
When you dial one of the 3 preprogrammed emergency numbers, your phone will enter the Emergency Call Mode. In this mode, the phone will attempt to complete the emergency call using any available cellular system from which it can obtain service.
After it places an emergency call, the phone will stay in the Emergency Call Mode, and will display “Emer- gency Call Mode, END to exit”. In the Emergency Call Mode, the phone will attempt to continue to receive service from the Cellular system that it used to com- plete the call. The phone will automatically exit the Emergency Call Mode after 5 minutes or after you press 
.
Receiving Calls 
The phone sounds an alert or vibrates to alert you of an incoming call. It also flashes the Incoming Call Indi- cator at the top of the phone.
To Receive a Call
When the telephone rings, press 
to answer the call. The 
indicator will light.
Note: To mute the ringer or stop the vibrating, press 
.
Any Key Answering
This feature permits you to answer an incoming call by
pressing any key on the key pad except 
and 
Rcl F 
.
27
