FACEPLATE OPTIONSI

Your CDM-9100 phone’s faceplate is available in vari- ous color options. Always use and store your phone with the faceplate attached.

To Replace Faceplates

1.Turn the phone off and remove the battery pack. Disconnect the phone from the AC Adapter or any other device.

2.Unscrew a screw with a size S Phillips-head screwdriver. The screw stays on the phone.

3.Put a coin in a slot at top of the phone and twist it.

4.Pull the top of the faceplate forward to open it.

5.Hold the phone leaning on your hand. Place the bottom of the faceplate against the bot- tom of the phone so that the inner tabs fit the slots. Close the faceplate and snap it shut. Make sure that all seven hooks are closed and all keys oper- ate smoothly.

6.Tighten the screw.

Note: Prevent any dust or small things going into the phone.

4

5

2

3

Screw

Hooks

92

Page 92
Image 92
Audiovox CDM-9100 manual Faceplate Optionsi, To Replace Faceplates