Audiovox CDM-9100 manual To Recharge Battery, Battery Type

To Recharge Battery

Your CDM-9100 phone has a built-in charger function. To recharge the Battery Pack, always install the Bat- tery Pack to the phone.

1.Attach the BTR-9100 Battery Pack to the phone.

2.If the phone is on with the indicator displayed,

press and hold to turn the phone off.

3.Insert the connector of the CNR-9100 AC Adapter to the phone connector.

4.Plug the AC Adapter to AC120V outlet.

5.Then the recharging starts. The phone displays

“Now Charging” with ani-

mation and the indica- Now Charging tor scrolling. It also lights the

Charging Indicator at the top of the phone.

6.When recharging is completed, the phone displays “Fully Charged!”.

7.Disconnect the AC Adapter from the outlet.

8.To disconnect the AC Adapter from the phone, hold the buttons to unlatch and pull the connector off.

The recharging time, from empty to full, depends on the environmental temperature, 0 to +35 °C.

Battery Type	Recharging Time
Lithium Ion Battery Pack (BTR-9100)	1.5 to 2 h

Notes: 1. For complete recharging, it is recommended that the phone be turned off during recharg- ing.

2.It is normal for the battery to become a little warmer during recharging.

3.Do not feed power to the phone without the battery pack attached.

CDM-9100 AC120V

AC Adapter

CNR-9100

Buttons to unlatch

20