To Mute a Phone Conversation
There are two ways to mute the microphone during a call.
1. Press the key under | Mute | , or press | F | F . |
2.Then the screen displays “Phone is muted!”.
3.To return to normal mode, press the key under
Unmute , or press F
F
again.
Note: Terminating a call cancels the muting.
Speakerphone Mode (One-Way)
This feature allows you to listen to the party or your voice mail through the
1.To activate this feature, press V
during a call. The screen displays “Speaker ON!”.
2.Press 
or 
to adjust the earpiece/speak- erphone volume.
3.To return to normal mode, press V
again.
Note: Terminating a call cancels the speakerphone mode.
Automatic Talk Timer
The talk time of the current call will be automatically displayed. For example, “1H 23M 45S”.
Scratch Pad Dialing
If you enter a telephone number during a call, the num- ber will be stored in the Scratch Pad memory.
After terminating the call, the number you entered can
be dialed by pressing 
.
Note: You can deactivate “Sending DTMF” so that key- pad tones will not be transmitted to the calling party. See Sending DTMF (F34) on page 74.
Call Waiting
Your service provider may provide Call Waiting service. When you are on a call, you may hear a beep tone alert- ing you of another incoming call.
Your phone displays “New Caller” and the new caller’s name and number. The name is as you programmed it in your phonebook.
1.Press 
to answer the new call.
2.Press 
again to switch between the two calls.
29
