Fisher-Price M7949 manual Problems & Solutions, Problem Solution

	Problems & Solutions
Problem		Solution
You hear static or buzzing		There may be a physical obstruction or noise level causing interference.
		Change the location of reciever or try a different channel. Range varies
		depending on surrounding conditions such as noise levels, physical
		obstructions and signal interference.
Reception display on receiver LCD		Transmitter power is off. Turn transmitter power on.
screen flashes and you hear a low
		Transmitter and receiver are on different channels. Change both units to the
pitched beep
		same channel.
		Loose power cord connection and transmitter power is off. Check
		transmitter power cord plug-to-outlet connection.
		No power to wall outlet and transmitter power is off. Make sure light switch
		that controls power flow to wall outlet is on.
		Power is off because circuit breaker for room is off. Make sure house fuses
		and circuit breakers are on.
Receiver LCD screen does not turn on		Receiver power is off. Turn receiver power on.
		Battery needs to be recharged. Charge the battery for 8 hours. Or, use the
		AC adaptor as a power source (and charge the battery at the same time).
		Power is off because circuit breaker for room is off. Make sure house fuses
		and circuit breakers are on.
		No power to wall outlet and power is off. Make sure light switch that
		controls power flow to wall outlet is on.
Receiver(s) LCD screen indicates low		Battery needs to be recharged. Charge the battery for 8 hours. Or, use the
battery power	and you hear	AC adaptor as a power source (and charge the battery at the same time).
a high pitched beep
Transmitter power indicator does		Transmitter power is off. Turn transmitter power on.
not light
		Loose power cord connection and transmitter power is off. Check
		transmitter power cord plug-to-outlet connection.
		No power to wall outlet and transmitter power is off. Make sure light switch
		that controls power flow to wall outlet is on.
		Power is off because circuit breaker for baby’s room is off. Make sure house
		fuses and circuit breakers are on.
You can hear conversations or sounds		There is signal interference due to other nursery monitors on same channel
from other homes		or cordless telephone use. Change the channel on all units.

Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are damaged, please contact Fisher-Price®.

15