Receiver Battery Installation

Socket

Battery Connector

•Locate the battery compartment door on the back of the receiver.

•Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.

•Plug the battery connector into the receiver socket.

Hint: If the battery connector will not plug into the socket, turn it over and try again. Do not force the battery connector into the receiver socket.

• Replace the battery compartment door. Tighten the screws with a Phillips screwdriver.

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

•Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.

•Never short-circuit the battery terminals.

•Use only batteries of the same or equivalent type as recommended.

•Do not charge non-rechargeable batteries.

•If removeable, rechargeable batteries are used, they are only to be charged under adult supervision.