Important!
•For proper setup and use, please read these instructions.
•Please keep this instruction sheet for future reference, as it contains important information.
•Transmitter operates on AC current.
•Receiver operates on AC current (use enclosed AC adaptor) or a 3.6V, 350mAH nickel metal hydride rechargeable battery pack (included).
•Before
•Adult assembly is required to install battery pack (if used).
•Tool needed for battery pack installation: Phillips screwdriver (not included).
•This product is not intended to be used as a medical monitor and its use should not replace adult supervision.
•Test sound reception of receiver before
•To prevent entanglement:
-Never place transmitter in a crib or playpen. Keep transmitter and receiver out of baby’s reach.
-Never use extension cords with the AC adaptor.
•Never use transmitter or receiver near water (ie.: bathtub, sink, laundry tub or wet basement, etc.).
•Always use transmitter and receiver where there is adequate ventilation. To prevent overheating, keep transmitter and receiver away from heat sources such as radiators, heat registers, direct sunlight, fire, stoves, amplifiers, or other appliances that produce heat.
•
•Always remember that you are using public airwaves when using your monitor. Conversations, even from rooms near transmitter, may broadcast to other nursery monitors, radios, cordless telephones, or scanners outside your home. To protect privacy of your home, always turn transmitter off when not in use.
Frequency: 915 - 920 MHz
•Do not disassemble the sealed battery pack. Do not recharge a battery pack that shows leakage or corrosion.
•Do not connect to more than the recommended power supplies.
•If you use a battery charger (enclosed AC adaptor), it should be examined regularly for damage
to the cord, plug, enclosure and other parts. Do not use a damaged battery charger until it has been properly repaired.
•Use only the provided AC adaptor to charge the battery pack.
•Product features and decoration may vary from photos.