Monkeys Chasing Tails

Planning the Circles in BERNINA Embroidery Software 6

Monkey Sitting on Turtle

(10” x 14” green fabric; bind with bias color 1)

 Open design BC01414 — the monkey and turtle group.

 Right click on the Show Hoops icon. Select the artista

255 x 145 Oval Hoop from the drop down menu and place a

check in the box next to Display Hoops. Click OK.

 Select File > Insert Design and select design BC01419 — the plant. Move it to the right of the monkey and turtle design. Visually align the lower edges of the two designs.

 Select File > Insert Design and select design BC01410 — the sun. Move it between, and slightly higher than, the monkey and the plant. Click the Show All icon to see the entire design.

 Save the design as Monkey Sitting on Turtle

Grouping.ART.

 Click on the Write to Machine icon and send the design to a USB stick or your embroidery system.

Stork & Turtle

(10” x 14” ivory fabric; bind with bias color 2)

 Open design BC01427 — the turtle.

 Select File > Insert Design and select design BC01424 — the stork. Move it to place its feet on the turtle’s back.

 Click the Remove Overlaps icon.

 Save the design as Stork and Turtle.ART.

 Click on the Write to Machine icon and send the design to a USB stick or your embroidery sys- tem.

(14” x 20” moss yellow fabric; bind with bias color 2)

 Open design BC01402 — the small monkey.

 Right click on the Show Hoops icon. Select Jumbo Hoop

#26 and place a check in the box next to Display Hoops. Click OK.

Note: If you do not have an 830 with the Jumbo Hoop, continue to work in the Large Oval Hoop. The design will be too large to stitch in one hoop- ing, so you will need to reposition the designs to fit, or use the Multi-Hooping feature of BERNINA Embroidery Software 6.

 Click View > Zoom Out 2x.

 Select the monkey and click the Wreath icon. Change the number in the box to 5.

 Move the mouse without clicking until the tail of one monkey is near the cheek of the following monkey. Click the mouse when you are satisfied with the placement.

 Press “C” on the computer keyboard to view the design in the center of the workspace.

 Save the design as Monkeys Chasing

Tails.ART.

 Click on the Write to Machine icon and send the design to a USB stick or your embroidery system.

Visit www.berninausa.com

for additional BERNINA projects,

product information, and promotions!

©2011 BERNINA of America, Inc.	jpl	Page 7 of 10