Chauvet ST-800X user manual Appendix, Returns Procedure, Claims, Maintenance

Page 13

5. Appendix

Returns Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the customer’s responsibility. CHAUVET reserves the right to use its own discretion to repair or replace product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Claims

Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is damaged due to shipping. Any other claim for items such as missing component/part, damage not related to shipping, and concealed damage, must be made within seven (7) days of receiving merchandise.

Maintenance

To maintain optimum performance and minimize wear, fixtures should be cleaned frequently. Usage and environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned at least twice a month. Dust build up reduces light output performance and can cause overheating. This can lead to reduced lamp life and increased mechanical wear. Be sure to power off fixture before conducting maintenance.

Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust collected on external vents and internal components. Clean all glass when the fixture is cold with a mild solution of glass cleaner or Isopropyl Alcohol and a soft lint free cotton cloth or lens tissue. Apply solution to the cloth or tissue and drag dirt and grime to the outside of the lens. Gently polish optical surfaces until they are free of haze and lint. Do not to touch the lamp glass when cleaning fixture. Oil and dirt can cause damage and premature aging of the lamp. In the event that the lamp is touched or becomes dirty, clean the lamps with an alcohol wipe.

The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics. Clean with soft cloth using normal glass cleaning fluid. - Always dry the parts carefully. - Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.

ST-800X User Manual

13

2007-03-07/10:58

Image 13
Contents ST-800X DMX Mega StrobeTable of Contents Unpacking Instructions Before You BeginContact Us Your shipment includes the followingProtection against Electric Shock Important Safety InformationProtection against Fire & Burns Protection against exposure to UV Ultraviolet RadiationIntroduction FeaturesDMX Channel Summary Strobe Intensity Speed Rotary knob Product OverviewAC Power SetupMounting Fixture Linking Cable ConnectorsDMX Data Cable Pin to 5-Pin Conversion Chart Setting up a DMX Serial Data LinkStandalone/Master-Slave Fixture Linking PCB Lamp InstallationOperating Modes Operating InstructionsSetting the DMX Address Maintenance Returns ProcedureAppendix ClaimsBinary & DMX DIP-switch Addressing DMX & Binary Address Quick Reference Chart Binary Addressing Quick Reference ChartDMX Channel Values Technical SpecificationsTechnical Support