Century PM-1646AA instruction manual Bassinet, Attachment Strap, Hook

Page 5

ASSEMBLY and USE continued

HINT: It may be necessary to lift end of Playard to push center down.

6Place floorboard in Playard with

padded side facing up.

NOTE: DO NOT install floorboard if using bassinet. Go to bassinet assembly section.

7 Secure ends of floorboard to Playard by passing Attachment Straps through holes in bottom of Playard floor and securing to underside of Playard.

Attachment

Strap

WARNING

To prevent child from suffocating, attachment straps MUST be secured to underside of Playard.

Bassinet

WARNING

Avoid serious injury or death:

Use bassinet with infant who weighs less than 8.2 kg (18 lbs.) and is less than 63.5 cm (25 inches) tall.

DO NOT use without floorboard being properly place in bassinet.

Discontinue use of bassinet if infant can push up on hands and knees or sit unassisted.

DO NOT carry bassinet with infant in it.

DO NOT use as a car bed.

SUFFOCATION HAZARD: To help prevent suffocation from entrapment, use only floorboard provided by Century. NEVER use additional mattress or padding.

1 Lay bassinet on flat surface and spread open.

2 Rotate and extend four (4) Hooks until they “click” in place.

Hook

3If floorboard is installed in

Playard, remove floorboard.

Playard assembly is now complete and ready to use.

4 Fold Floorboard into “W” shape and place in center of bassinet.

Floorboard

4

Image 5
Contents Instruction Manual Weight, Height and Activity Limits Table of ContentsImportant Information Need Help?Page Top Rail PlayardFloorboard Attachment Straps Hook BassinetAttachment Strap Pockets ChangerSlots Triangular T-Fitting TabFitting CanopyTriangular Tab Triangular Hole SleeveFolding and Storing Attachment Straps Floor Loop Handle Secure Attachment Straps by threading through loopsButton again Floor Loop Opening HandleReplacement Parts MaintenanceCleaning Parts List Model Price Quantity TotalShip to Replacement Parts Order FormRemember