Assembly
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.
Base Tube
Left Base Wire
1 | Right Base Wire |
|
•Place the base tube on a flat surface.
•Position the left and right base wires as shown.
•Fit the left base wire and right base wire into the base tube.
Feet Holes
3
• Insert an M5 x 20 mm screw through each foot and tighten.
Footrest
Base Wires
2 | 4 |
|
•Position the feet so the holes are toward you and the
•Fit the feet on the base tube, as shown.
•Position the footrest so that the soothing unit is upright.
•Fit the footrest onto the ends of the base wires.
3