3.Pivot the memory module down until it clicks into place.
If you do not hear a click as each end of the memory module snaps into the tabs, remove the memory module and reinstall it (see Figure 13).
Palmrest Assembly
M2.6 x
Figure 14. Removing the Palmrest Assembly Bottom Screws
The palmrest assembly consists of the palmrest, status lights, and touch pad assembly.
NOTICE: To avoid damaging the system board, you must remove the main battery before you service the computer.
1.Remove the keyboard bezel.
2.Remove the display assembly.
3.Remove the keyboard assembly.
4.Turn the computer upside down on a flat work surface.
5.Remove the six M2.6 x
NOTICE: Make sure that the work surface is clean to prevent scratching the computer cover.
6. Turn the computer
support.dell.com | Dell Latitude L400 Service Manual | 19 |