Dell L400 service manual Display Assembly, Modem Retainer, VGA and Parallel, Audio I/O Cover

When you are removing and replacing components, photocopy the Table 1 placement mat as a tool to lay out and keep track of the component screws.

Table 1. Screw Placement Mat With Component Screw Counts and Sizes

	Display Assembly	Display Assembly
Hard-Disk Drive	Hinge to Base:
	M2 x 4 mm	Bezel:
Assembly:
		M2 x 3.5 mm (6 each)
M3 x 3 mm	(2 each, black)
	M2 x 4.5 mm	Rubber Screw Covers
(2 each, black)
	(2 each, silver)	(6 each)
LCD Panel and	Display Assembly	Keyboard
Inverter:	Hinges:	Assembly:
M2 x 3.5 mm (5 each)	M2.6 x 4 mm (4 each)	M2 x 4 mm (4 each)
Palmrest Assembly:
M2.6 x 1.6 mm (6 each		Modem Retainer
[battery bay])	Touch Pad:
M2 x 4 mm		Bracket:
	M2 x 3.5 mm (3 each)
(4 each, black)		M2 x 9.5 mm (2 each)
M2 x 6 mm
(3 each, silver)
VGA and Parallel	IDE Connector:	Fan:
		M2 x 8 mm
Port:	IDE connector screws	(2 each, silver,
5 mm socket (4 each)	(2 each)	with 2 rubber washers
		each)
Speaker:	Audio I/O Cover:	System Board
M2 x 5 mm
		Assembly:
	M2 x 4 mm (2 each)
(2 each, silver,		M2 x 3.5 mm (6 each)
with rubber washer)

4 Dell Latitude L400 Service Manual