Dell L400 service manual Computer Orientation

Dell™ Latitude™ L400 Service

Manual

This manual provides instructions for removing and replacing field-replaceable components, assemblies, and subassemblies in your Dell Latitude computer. Unless otherwise noted, each procedure in this manual assumes the following conditions:

•The computer and any attached peripherals are turned off, and the peripherals are disconnected from the I/O panel on the back and right side of the computer.

•A part can be replaced by performing the removal procedure in reverse order unless otherwise noted.

When the display assembly is open nearly 180 degrees, use a book or something similar to support it. The angle of the display assembly with respect to the bottom case should never exceed 180 degrees. Also, when performing the procedures in this manual, the locations or directions relative to the computer are as shown in Figure 1 unless otherwise specified.

back of computer

left side right side

front of computer

Figure 1. Computer Orientation

support.dell.com Dell Latitude L400 Service Manual 1