Signal Level Divided Construction Chassis Design

N E W M O D E L I N F O R M A T I O N

DRA-395

■Signal Level Divided Construction Chassis Design

The circuit handling low-level signals has been divided into separate blocks to ensure that influences from these signals on each other are held to an absolute minimum. This new chassis design, known as the Signal Level Divided Construction (SLDC), preserves the purity of the signal, allowing it to be reproduced with much greater fidelity and clarity.

SIGNAL LEVEL DIVIDED CONSTRUCTION (S.L.D.C)

	TUNER
	BLOCK
	POWER
POWER	AMP

TRANS	BLOCK	PRE
		AMP
		BLOCK
		BLOCK

LOGIC CONTROL BLOCK

■Easy Simulcast Recording

This feature not only permits reception and recording of FM/TV simulcast programs onto videotape, but it can also be used to combine, for example, the sound from a CD with the picture from a video disc.

• Record Out Selector

Lets you listen to one source (example: Tuner), while recording another

source (example: CD). Ideal for making unattended tape copies.

■Video Terminals

Stereo video sources, such as hi-fi VCR, stereo TV, and DVD can all be easily connected to the DRA-395’s VDP, VCR and Video Aux terminals.

■Video Select Function

Allows you to select a video source, and then select an alternate audio input source, ideal for simulcasting, as well as watching TV sports programs while listening to radio commmentary.

■40-Station AM/FM Random Preset Memory Tuning

■Auto Preset Memory

FM stations can be searched by the tuner, and automatically stored in the preset memory up to 40 stations, ideal for locales with many FM stations.

■Sophisticated Tuning Circuit Design

Thanks to the PLL circuit design, reception drift is a thing of the past. The DRA-395 also has a 4-pole varactor diode in its front end to guarantee accurate input of station frequencies.

•Auto scanning of radio frequency bands

•Fast up/down manual tuning

•Manual step tuning

•Last-channel-tuned memory

■Other Useful Features

•Bass and Treble Tone Controls

•Tone Defeat

•Muting Function via remote controller

•A/B Speaker Switching

•Last Function Memory

•Switched AC Outlets

Specifications
■ Power Amplifier Section
Rated output	80 W + 80 W (8 ohms, 20Hz - 20kHz, THD 0.08 %)
Total hamonic distortion	0.009 % (-3 dB at rated output, 8 ohms)
Frequency response	10 Hz - 50 kHz ±1.5 dB (at 1 W)
■ Preamplifier Section
Input sensitivity/Impedance
PHONO(MM)	2.5 mV/47 kohms
CD, CD-R/TAPE, DVD/VDP,
VCR, V-AUX	200 mV/47 kohms
Output level/Load impedance
CD-R/TAPE	200 mV/47 kohms
ZONE 2, ZONE 3	1.2 V/47 kohms
RIAA deviation	±0.5 dB (20 Hz - 20 kHz)
Tone control	Treble: ±12 dB at 10 kHz
	Bass: ±12 dB at 100 Hz
■ FM Section
Tuning frequency range	87.5 - 107.9 MHz
Usable sensitivity	1.4 µV (14.2 dBf)

*Design and specifications are subject to change without notice.

S/N 50 dB sensitivity	Mono: 2.8 µV (20.2 dBf)
(µV at 75 ohms)	Stereo: 23 µV (38.5 dBf)
S/N ratio (A-weighting)	Mono: 80 dB, Stereo: 75 dB
Total hamonic distortion	Mono: 0.15 %, Stereo: 0.3 %
Capture ratio	1.5 dB
AM suppression	50 dB
Image rejection	70 dB
Effective selectivity	55 dB (±400 kHz)
Freqency response	30 Hz - 15 kHz, +0.2, -1.5 dB
Stereo separation	40 dB (1 kHz)
■ AM Section
Tuning frequency range	520 - 1710 kHz
Usable sensitivity	18 µV
■ General
Power supply	AC 120 V, 60 Hz
Dimensions	434 (W) x 147 (H) x 417 (D) mm
	17.1” (W) x 5.8” (H) x 16.4” (D)
Weight	9.7 kg, 21.4 lbs

DENON ELECTRONICS.	NIPPON COLUMBIA CO., LTD.
DIVISION OF DENON CORPORATION (USA)	14-14, AKASAKA 4-CHOME, MINATO-KU, TOKYO 107-8011, JAPAN
19 CHAPIN ROAD, P.O. BOX 867, PINE BROOK, NJ 07058-9777, USA
TEL: 973-396-0810 www.denon.com
DENON CANADA INC.
17 DENISON STREET, MARKHAM ONTARIO, CANADA L3R 1B5
TEL: 905-475-4085 www.denon.ca

12570501 A Printed in Japan

DRA-395