23
Software
23.1
Software update
Update from USB
It might be necessary to update the TV software. You need a computer with an
1 - Start the update on TV
Press , select Setup and press OK.
Select Update software > USB and press OK. 2 - Identify the TV
Insert the USB memory into one of the USB connections of the TV.
Select Start and press OK. An identification file is written on the USB memory device.
3 - Download the TV software
Insert the USB memory into your computer.
On the USB memory device, locate the file update.htm and double click it.
Click on Send ID.
If new software is available, download the .zip file. After the download, unzip the file and copy the file autorun.upg onto the USB memory device. Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update starts automatically.
The TV switches itself off for 10 seconds and then back on again. Please wait.
Do not . . .
•use the remote control
•remove the USB memory device from the TV
If a power cut occurs during the update, never remove the USB memory device from the TV. When the power returns, the update will continue.
At the end of the update, the message Operation
successful appears on screen. Remove the USB memory device and press on the remote control.
Do not . . .
•press twice
•press the power switch on the TV
The TV switches itself off (for 10 seconds) and then back on again. Please wait.
The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
Update from Internet
If the TV is connected to the Internet, you may receive a message from TP Vision to update the TV software. You need a
If you receive this message, we recommend you carry out the update.
Select Update. Follow the instructions on screen.
You can also look for new updates yourself. To look for an update . . .
1 - Press and select Setup and press OK.
2 - Select Update software > TV with Internet, then press OK. Follow the instructions on screen.
When the update is complete, the TV switches off and back on again automatically.
Wait for the TV to switch itself back on.
23.2
Software version
To view the current TV software version . . .
1 - Press and select Setup and press OK.
2 - Select Software settings and press OK.
3 - Select Current software info and see Release Version. 4 - Press , repeatedly if necessary, to close the menu.
23.3
Open source software
This television contains open source software. TP Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences.
This offer is valid up to three years after product purchase to anyone in receipt of this information.
To obtain the source code, please write in English to . . .
Intellectual Property Dept.
TP Vision Europe B.V.
Prins Bernhardplein 200
1097 JB Amsterdam
The Netherlands
23.4
Open source license
Acknowledgements and License Texts for any open source software used in this Philips TV.
79