Philips 40PUK6809, 58PUK6809  and . To check the frequency, select Search and press OK

control digit keys. Alternatively, select the frequency, position the arrows on a number with  and  and change the number with

and . To check the frequency, select Search and press OK.

If you use DVB-C to receive channels, the option Symbol rate mode is available. For Symbol rate mode, select Automatic, unless your cable provider gave you a specific symbol rate value. To enter the symbol rate value, use the number keys.

Manual installation

Analogue TV channels can be manually installed, channel by channel.

To install analogue channels manually . . .

1 - Press  and select Setup and press OK.

2 - Select Channel settings > Channel installation > Analogue : Manual installation and press OK.

•System

To set up the TV system, select System and press OK. Select your country or the part of the world where you are now.

•Search channel

To find a channel, select Search channel and press OK. Select Search and press OK. You can also enter a frequency yourself. If the reception is poor, press Search again. If you want to store the channel, select Done and press OK.

•Fine tune

To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with  or .

If you want to store the channel found, select Done and press OK.

•Store current channel / Store as new channel

You can store the channel on the current channel number or as a new channel number.

Select Store current channel or Store as new channel.

You can redo these steps until you have found all available analogue TV channels.

34