Assembly
IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken.
Contact
#8 x 3/4" Screw
Shown Actual Size
Cross
Brace
CAUTION
This package contains small parts |
|
|
in its unassembled state. | 2 |
|
Adult assembly is required. | Side | |
|
| Rails |
Cross Brace
Button
Push
Push
•Insert a screw through the hole in the bottom of each side rail and into the cross brace. Tighten the screws with a Phillips screwdriver. Do not
Seat Back Tube
Press | Tabs |
| |
Side Rail | |
Sockets | |
1 | Side Rails |
|
•Position each side rail so that the button faces outward.
•Fit the cross brace between the side rails, as shown.
•Push the cross brace down to “snap” it into place. This may require a lot of force.
3
•Insert the seat back tube into the socket in each side rail.
•While pressing the tabs on the ends of the seat back tube, continue to insert the seat back tube into the sockets in each side rail, until the tabs “snap” into place. Make sure you hear a “snap” on each side.
•Pull the seat back tube up to be sure it is secure in the
3
side rail sockets.