Fisher-Price 79026 instruction sheet Toy Bar, Calming Vibrations

Page 10

Toy Bar

Toy Bar

Plug

Plug

Toys

5

• Fit the plugs on each end of the toy bar into the sockets in each side rail.

• Fit the toy bar straps through the slot in the toy rings. Fasten the straps.

• Or, attach the toys to the

pad straps (see Step 4).

Hint: Pull the monkey’s head for a short tune.

Calming Vibrations

6

Power Switch

•Make sure your child is properly secured in the seat.

•Slide the power switch to the on position for calming vibrations.

•Slide the power switch to the off position to turn vibrations off.

10

Image 10

Contents Infant-to-ToddlerRocker Consumer Information Parts For other countries, outside the United StatesAssembly #8 x 3/4 Screw Shown Actual SizeInsert a #8 x 11/4 screw Tabs snap into place. Make sure you hear a snap on each side Assembly is now complete Tips Recline Make sure you hear a click on both sidesTo tighten the belts ToysTo loosen the belts Toy Bar Calming VibrationsKickstand Storing the Restraint System for Toddler UseCare To remove the pad