Philips SCD590 manual Talk function, Silent baby monitoring, Nightlight, Paging the parent unit

Page 12

12English

2Briefly press the volume + and – buttons on the parent unit until the desired microphone sensitivity level for the baby unit has been reached.

Note: If you press the SENSITIVITY button and/or the volume + and – buttons too long, the microphone sensitivity is not adjusted.

-one light on = minimum sensitivity level

-all lights on = maximum sensitivity level

Note:When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and therefore transmits more often. As a result, the units consume more power.

Talk function

You can use the TALK button on the parent unit to talk to your baby (e.g. to comfort your baby).

1Press and hold the TALK button and talk clearly into the microphone (Fig. 19).

2Release the TALK button when you have finished talking.

Note:When you press the TALK button, you can no longer hear your baby.

Silent baby monitoring

1Briefly press the volume down (–) button on the parent unit until the volume is turned off

completely (Fig. 20).

The volume is completely turned off when all sound level lights are out.

,As long as the baby unit does not detect a sound, all sound level lights on the parent unit are out (Fig. 21).

,When the baby unit picks up a sound, one or more sound level lights on the parent unit come on.The louder the sound, the more lights come on.

Nightlight

1Briefly press the nightlight button Q on the baby unit to turn on the nightlight. (Fig. 22)

2Press the nightlight button Q again briefly to turn off the nightlight.

,The nightlight dims gradually before it goes out completely.

Note: If you press the nightlight button Q too long, the nightlight does not come on or go out. Tip:Turn off the nightlight when you operate the baby unit on batteries.This saves power.

Paging the parent unit

If you have misplaced the parent unit and its volume is turned off, you can use the PAGE button on the baby unit to locate the parent unit.

1Briefly press the PAGE button on the baby unit (Fig. 23).

,The parent unit automatically resets to medium volume level and produces a paging alert tone.

2To stop the paging alert tone, press the PAGE button again briefly or press any button on the parent unit.

Note: If you press the PAGE button too long, the parent unit does not produce the paging alert tone.

Belt clip and neck strap

If the batteries of the parent unit are sufficiently charged, you can take the unit with you inside and

outside the house if you attach the unit to your belt or waistband with the belt clip or if you hang it round your neck with the neck strap.This allows you to monitor your baby while you are moving around.

Image 12
Contents Dect Baby Monitor Page Page Page SCD590 Introduction ShockNever spill liquid of any kind on the product Special disposal instructions Eyes or skinCompliance information Radio InterferenceRF Radiation Exposure Statement Do not attempt to repair or modify this equipmentBattery operation Preparing for useBaby unit Corded operationUsing the appliance Features Adjusting loudspeaker volumeAdjusting microphone sensitivity Operating rangeTalk function Silent baby monitoringNightlight Paging the parent unitCleaning and maintenance StorageEnvironment Warranty AssistanceFrequently asked questions Why does the parent unit Crying? Button on the parent unit Why do the batteriesWhy does the charging React slowly to the baby’sQuestionAnswer Page Page 4222.002.6467.2