Psu

LED Indicators

6 Gbps SAS I/O module	14 one-color LED status indicators, four each for
	the three SAS ports, and two for the module status
Fan module	• One single-color LED indicator for module
	status
	• One single-color LED indicator for battery fault
	status (not currently used)
	• One single-color LED indicator for fan fault
	status
	• One single-color LED indicator for power
	status
PSU	• One single‐color LED indicator for PSU fault
	status
	• One single‐color LED indicator for AC fault
	status
	• One single‐color LED indicator for power status

Power Supply Units (per PSU)

Watt	2.8 kW
Voltage	200–240 VAC (8.6 A–4.3 A)
Heat dissipation	191–147 W
Maximum inrush current	Under typical line conditions and over the entire
	system ambient operating range, the inrush current
	may reach 55 A for each PSU for 10 ms or less.

Available Hard Drive Power (Per Slot)

Supported hard drive power consumption	Up to 1.16 A at +5 V,  Up to 1.6 A at +12 V
(continuous)

I/O Card Power (Per Slot)

Maximum power consumed by I/O Card	11 W at +12 V
Maximum available power	100 W at +12 V
Maximum available power	1 W at +5 V (standby)

Physical

Height	22.23 cm (8.75 inches)
Width	48.26 cm (19 inches)