HoMedics SS-3000 instruction manual Using the Picture Projection, Changing the Image Disc

Using the Picture Projection

NOTE: The projector door must be completely closed, pushed all the way up, in order for the picture projector to function (Fig 6).

1.Turn on the picture projection on by pressing the PROJECTION ON/OFF button (Fig 3).

2.To adjust the brightness of the projection, turn the HI/LO knob (Fig 5) to your desired level.

3.The angle of the projector can be adjusted by angling forward up to 90°

4.When finished using the picture projection you may turn it off by pressing the PROJECTION ON/OFF button.

NOTE: SOUNDS and PROJECTION are independent functions. You can use one at a time or both combined.

FIGURE 5 FIGURE 6

FIGURE 7

PROJECTION LENS

IMAGE

DISC

DISC HOLDER

PROJECTOR

DOOR

DISC STORAGE SLOTS

FIGURE 8

IMAGE

DISC

“UP”

DISC HOLDER

PROJECTOR

DOOR

HIGH/LO

KNOB

FRONT

OF UNIT

BACK OF UNIT

PROJECTOR DOOR

UP FOR PROJECTION

DOWN FOR DISC

JACK

DISC STORAGE SLOTS

Changing the Image Disc

1.Make sure projection is off, then slide down the projector door and pull out the disc holder (Fig 7).

2.Gently remove the current disc and set aside (Fig 7).

3.Select a new disc from the disc storage slots (Fig 6) and place into the disc holder so that you can see the word “UP” printed on the disc (Fig 8).

4.Slide the disc holder back into the unit and push projector door up to close (Fig 6).

NOTE: The projector door must be completely closed, pushed all the way up, in order for the picture projector to function (Fig 6).

5. Put original image disc into empty disc storage slot (Fig 6).

6 7