Razor 25143511 owner manual Repair and Maintenance, Replacing the Fuse, Inflating the Tires

Page 4

Repair and Maintenance

Turn power switch off before conducting any maintenance procedures.

qReplacing the Fuse

WARNING: To prevent

TURN

Amperage number

shock make sure power is in the “off” position and charger is not plugged into unit while conducting any maintenance procedures.

POWER

OFF

1 Make sure the power switch is turned off.

4 Close the fuse box.

2 Open fuse box located on the battery.

3 Remove fuse and replace with a new one of equal amperage. Note: Amperage is located on top of fuse. Fuse must be replaced with one of equal amperage.

qInflating the Tires

Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and purchase.

1 Using a bicycle style tire pump equipped for a Schrader-type valve, inflate the tires to the PSI indicated on the sidewall of the tires.

Note: The pressurized air supplies found at stations are designed to inflate high-volume automobile tires. If you decide to use such an air supply to inflate your Dune Buggy tires, first make sure the pressure gauge is working, then use very short bursts to inflate to the correct PSI. If you inadvertently over-inflate the tire, release the excess pressure immediately.

Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

3

Image 4
Contents Dune Buggy 25143511Contents Safety WarningsAssembly and Set-Up Charging the BatteryBefore You Begin Required ToolsReplacing the Fuse Repair and MaintenanceInflating the Tires Troubleshooting Guide Battery Care and DisposalReplacement Parts Repair Centers ChargerBattery is old and will not accept SB 1918 California Declaration Dune Buggy Parts Dune Buggy Parts Warranty Safety remindersPRE-RIDE Checklist