Black Box ICI42C manual Technical Description, Interrupts, Why Use an ISP?

Page 14

CHAPTER 5: Technical Description

5.Technical Description

5.1Interrupts

A good analogy of a PC interrupt is a telephone ringing. The phone bell is a request for us to stop what we are currently doing and take up another task (speak to the person on the other end of the line). This is the same process the PC uses to alert the CPU that a task must be performed. The CPU, upon receiving an interrupt, makes a record of what the processor was doing at the time and stores this information on the “stack”; this allows the processor to resume its predefined duties after the interrupt is handled, exactly where it left off. Every main sub-system in the PC has its own interrupt, frequently called an IRQ (short for Interrupt ReQuest).

5.2 Why Use an ISP?

The Interrupt Status Port (ISP) is a read-only 8-bit register that sets a corresponding bit when an interrupt is pending. Port 1 interrupt line corresponds with Bit D0 of the status port, Port 2 with D1, etc. The use of this port means that the software designer now only has to poll a single port to determine if an interrupt is pending.

The ISP is at Base+7 on each port (example: Base=280 hex, Status Port=287, 28F...etc.). The Adapter will allow any one of the available locations to be read to obtain the value in the status register. Both status ports on the Adapter are identical, so either one can be read. Example: This indicates that Channel 2 has an interrupt pending.

Bit Position:

7

6

5

4

3

2

1

0

Value Read:

0

0

0

0

0

0

1

0

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Port Serial Host Adapter PCI FCC and IC Statements Port Serial Host Adapter PCI NOM Statement Trademarks Table of Contents Specifications CE Approval YesWhat’s Included IntroductionOverview Card Setup Clock ModesBaud Rates and Divisors for the Div1 mode For this Data RateAddress and IRQ selection Installation Setting Up the Operating SystemInstalling the Hardware Interrupts Why Use an ISP?Technical Description Port # Connector Pin AssignmentsDB25 RS-232 DTE Signal Name Pin # Mode Calling for Technical Support Appendix a TroubleshootingUsing the Serial Utility Diskettes Appendix B RS-232 Electrical Interface Figure C-1. Asynchronous Communication Bit Diagram Appendix C Asynchronous CommunicationPort Serial Host Adapter PCI Appendix D Board Layout Figure D-1. Board LayoutEMC Directive Statement Appendix E Compliance NoticesFederal Communications Commission Statement Copyright 2000. Black Box Corporation. All rights reserved

ICI42C specifications

The Black Box ICI42C is a cutting-edge device designed to meet the needs of modern communication infrastructure. It stands out due to its robust features, advanced technology, and remarkable characteristics that cater to a range of applications in various industries.

One of the main features of the ICI42C is its ability to support high-definition video transmission over long distances without any loss in quality. This is particularly advantageous for industries that require reliable video feeds, such as security, broadcast, and remote monitoring. The device employs advanced compression algorithms that ensure seamless streaming of video content while keeping bandwidth usage to a minimum.

In terms of connectivity, the ICI42C is equipped with multiple input and output ports, allowing for versatile integration with existing systems. The device supports various types of connections, including HDMI, SDI, and IP-based systems. This flexibility makes it suitable for both legacy and cutting-edge installations, further enhancing its appeal for businesses looking to upgrade their infrastructure without complete overhauls.

Another significant characteristic of the ICI42C is its user-friendly interface. The device comes with an intuitive web-based management system that allows users to easily configure settings, monitor performance, and conduct troubleshooting. This streamlining of operations is crucial for professionals who require efficient workflows and quick resolutions to any potential issues that may arise during operation.

The ICI42C also boasts a high level of scalability. As businesses grow and their communication needs evolve, the device can adapt to accommodate increased workloads without the need for extensive reconfiguration. This scalability is essential for future-proofing investments, as organizations can expand their capabilities without facing significant obstacles.

Security is a top priority with the Black Box ICI42C. The device incorporates advanced encryption technologies to safeguard transmitted data against unauthorized access. This feature is vital for industries that handle sensitive information and require compliance with stringent regulations.

Additionally, the ICI42C is designed with durability in mind. Its rugged construction ensures reliability in various environments, whether it be a corporate setting, a live event, or an outdoor location. This resilience guarantees longevity and reduces the risk of service interruption due to hardware failure.

In summary, the Black Box ICI42C emerges as a versatile, scalable, and secure solution for high-definition video transmission and advanced communication needs. With its array of features and robust technology, it supports a wide range of applications, making it an essential asset for any organization seeking to enhance its communication infrastructure.
Top Page Image Contents