AT&T feature module 2 system manual Auto Answer-Intercom, Programming HOW to USE

PROGRAMMING

HOW TO USE

To program an Auto Answer-All button, label a button that has lights, enter programming mode, and follow these steps:

1 Touch the button you want to program.

2 Dial *75.

3 Program another feature, or leave programming mode.

To have a modem or an answering machine answer calls automatically:

1 Touch Auto Answer-All.

The green light next to the button goes on.

To stop automatic answering:

1 Touch Auto Answer-All again,

The green light next to the button goes off.

Auto Answer-Intercom

DESCRIPTION	You may have an optional Hands-Free Unit connected to your voice terminal.
	If you want it to go on automatically when you receive intercom calls so you
	can answer them without lifting your handset, you need to program an Auto
	Answer-Intercom button.
CONSIDERATIONS	● You should use the Auto Answer-Intercom feature instead of Auto
	Answer-All to activate a Hands-Free Unit when intercom calls come in.
	● If you want an answering machine to answer intercom calls, use the Auto
	Answer-All feature instead of Auto Answer-Intercom. (See “Auto
	Answer-All.”)
	● You can have both Auto Answer-All and Auto Answer-Intercom
	programmed for your voice terminal; however, the two buttons cannot be
	turned on at your voice terminal at the same time.
	● If you have a built-in speakerphone or Hands-Free Answer on Intercom,
	you don‘t need to program the Auto Answer-Intercom feature.
	To program an Auto Answer-Intercom button, label a button that has lights,
	enter programming mode, and follow these steps:
	1 Touch the button you want to program.
	2 Dial *70.
	3 Program another feature, or leave programming mode.

MERLIN II System Features 2-11