AT&T feature module 2 system manual Privacy, 132MERLIN II System Features

Privacy

DESCRIPTION

CONSIDERATIONS

.

PROGRAMMING

HOW TO USE

If you share an outside line with other people, you may choose to program a Privacy button that allows you to prevent others from accidentally joining your telephone conversations.

●To turn the Privacy feature on and off, you can use a dial code instead of programming a button. However, if you use a dial code to turn on this feature, you will not have a light to remind you that the feature is active.

●You can activate the Privacy feature during a call in progress. For example, you may want someone to bridge onto a call and then make the call private.

To program a Privacy button, label a button that has lights and follow these steps:

1Enter programming mode.

2Touch the button You want to program.

3Dial “72.

4Leave programming mode.

To prevent others from joining your calls:

1Before placing or receiving a private call, touch Privacy (or dial #31).

If the feature is programmed on a button, the green light next to the button goes on.

This feature reamins active until you:

1 Touch Privacy again (or dial #30).

If the feature is programmed on a button, the green light next to the button goes off.

2-132MERLIN II System Features