AT&T feature module 2 system manual To assign voice terminals to paging groups, Dial #88

4 Touch Auto Intercom buttons until they show the paging group

assignment you prefer.

Steady green light on = voice terminal is assigned to the group

		Green light off = voice terminal is not assigned to the group
5	Touch [PageZn] and repeat steps 2 through 4 to add group page zones.
6	Touch Conference		to return to the administration menu.
7 To get a printout			of paging groups, touch these buttons: [More], [More],
	[Print] , [More] , [More] .
8	Touch [PgZone] to begin printing.
9	Touch Conference		to return to the administration menu, or leave

administration mode.

With a BIS-34D Console

To assign voice terminals to paging groups:

	1	Touch Message.
		The lights next to the administration mode buttons stop flashing. The green light next to
		Message remains on.
	2	Dial #88.
	3 Dial the number of the paging group in which you want to add or remove
		voice terminals (1 through 7).
		A green light comes on next to the Auto Intercom button of any voice terminal already
		assigned to that paging group.
	4 Touch Auto Intercom buttons until they show the paging group
		assignment you prefer.
		Steady green light on = voice terminal is assigned to the group
		Green light off = voice terminal is not assigned to the group
	5 Repeat steps 3 through 5 for each paging group in which you want to
		assign or remove voice terminals.
	6 If you have a printer, you can get a printout to make sure your paging
		groups are set up the way you want them. To get a printout, dial #903.
		The green light next to Message flashes. When the printout is completed, you hear a beep
		and the green light next to Message becomes steady.
	7 Touch Message and go on to another procedure, or leave administration
		mode.
PROGRAMMING	To program a button for a paging group, label the button Group Page plus

the group number, enter programming mode, and follow these steps:

1 Touch the button you want to program.

2 Dial ’91 plus the Group Page code (881 through 887) or a code assigned through Flexible Numbering.

3 Program another feature, or leave programming mode.

MERLIN II System Features 2-73