AT&T feature module 2 system manual Auto Intercom, Touch Auto Answer-Intercom again

HOW TO USE	To have your Hands-Free Unit go on automatically when you receive
	intercom calls:
	1 Touch Auto Answer-Intercom.
	The green light next to the button goes on.
	To return to answering calls yourself:
	1 Touch Auto Answer-Intercom again.
	The green light next to the button goes off.

Auto Intercom

DESCRIPTION	You can use an Auto Intercom button for one-touch dialing of intercom
	numbers. Program any intercom number onto an Auto Intercom button and
	use the button instead of dialing the intercom number.
CONSIDERATIONS	● You cannot have both an Auto Intercom button and a Manual Signaling
	button for the same person. If you try to program both, you deactivate
	the one that you programmed earlier.
	● If you program this feature onto a button with lights, the green light next
	to the button goes on when the person at that intercom number uses the
	voice terminal or uses the Do Not Disturb feature. When the person calls
	you, the light next to the person’s Auto Intercom button flashes.
PROGRAMMING	To program an Auto Intercom button, label an available button (one with
	lights is recommended, though not required), enter programming mode, and
	follow these steps:
	1 Touch the button you want to program.
	2 Dial *91 plus an intercom number.
	3 Program another feature or leave programming mode.
HOW TO USE	To place a ringing intercom call with one touch:
	1 Touch the Auto Intercom button for the intercom number you want to
	reach.
	Your voice terminal speaker goes on and you hear ringing.
	2 If the other person answers, lift your handset. If not, touch Speaker or
	Speakerphone to cancel the call.
	To place announced intercom calls:
	1 If the red light next to it is not already on, touch Intercom-Voice.
	2 Touch the Auto Intercom button for the intercom number you want to
	dial.
	Your speaker goes on and you hear a beep.
	3 Lift your handset and begin speaking.

2-12MERLIN II System Features