AT&T feature module 2 system manual Touch Message, If you enter These tables are 6-digit

cDial the entry number (0 through 5) and touch [Enter] .

dTouch Drop.

This clears out any entry already there.

ePerform the appropriate step:

Dial a new pool number and touch [Enter] to enter a new pool number, or

Touch [Enter] to insert a blank entry.

fTouch [Exit] to return to the Tables screen.

7To add or delete other digits in the Special Number Table: a From the Tables screen, touch [Spc/Nm] .

b Dial the other digits or touch Drop to remove digits. c Touch [Enter] .

8When you’ve entered all the information from the Forms for ARS Tables, touch Conference.

9 If you want a printout of the ARS tables, follow these steps:

a From the administration menu, touch [More], [More], [Print], [More] .

bTouch [ARS] to begin printing.

cTouch Conference to return to the administration menu, or leave administration mode.

With a BIS-34D Console

Administering the Area Code/Exchange Sections

1 Touch Message.

2 If you are setting Up a new system and don’t need any 6-digit tables, go on to step 3, If you have 6-digit tables, perform this step:

To specify how many of your ARS tables should be 6-digit rather than 3- digit tables, dial #305, then the number of tables (0 through 8) that should be 6-digit tables.

If you enter:	These tables are 6-digit:
# 3050	None
# 3051	Table 0 only
# 3052	Tables 0 and 1
# 3053	Tables 0, 1, and 2
# 3054	Tables 0 through 3
# 3055	Tables 0 through 4
# 3056	Tables 0 through 5
# 3057	Tables 0 through 6
# 3058	Tables 0 through 7

3 Dial #6.

4 Dial the table number (0 through 7).

2-16MERLIN II System Features