AT&T feature module 2 Touch either of two adjacent Auto Intercom buttons, To make a data call

2 Touch either of two adjacent Auto Intercom buttons:

Green light on = station jack part of voice/data pair

Green light off = station jack not paired

3 Touch Conference to return to the administration menu or leave

administration mode.

With a BIS-34D Console

1 Touch Message.

2 Dial #211.

3 Wait until the system beeps twice.

		The green light next to Message becomes steady.
	4 Touch either of two adjacent Auto Intercom buttons:
		Green light on = station jack is part of the voice and data pair
		Green light off = station jack is not paired
	5	Touch Message and go on to another procedure, or leave administration
		mode.
HOW TO USE	To make a data call:
	1 Touch Speaker.
	2	Dial the outside telephone number or intercom number for your host
		computer.
	3	When the computer signals you that you have made a successful
		connection, turn on your modem.
		The green light next to the line or intercom button you used to call the computer goes on
		and stays on until you end the data call.
		The speaker goes off when you turn on the modem.
	4	Log on from your terminal keyboard.
	To end a data call:
	1	Log off from your terminal keyboard.
	2 Turn off your modem.
		The green light next to the line or intercom button you used to call the computer goes off.

MERLIN II System Features 2-147