AT&T feature module 2 system manual Touch Intercom-Voice Or Intercom-Ring, E a k e r p h o n e

5 To associate line or line pools with this group, touch the line buttons until the lights show the appropriate code:

Green light on = line is assigned to the group

Green light off = line isn‘t assigned to the group

6 T o u c h [GrpCall] and repeat steps 2 through 5 for each Call Distribution group you want to administer.

7 T o u c h Conference to return to the administration menu.

8 To get a printout of the Call Distribution groups, touch [More], [More],

[Print] , [More] , [More] , [GrpCall] .

9 Touch Conference to return to the administration menu, or leave

administration mode.

With a BIS-34D Console

Follow these steps to set up Call Distribution groups:

1 Touch Message.

2 Dial #87.

3 Dial the number of the Call Distribution group (0 through 5).

4 To assign voice terminals to the group, touch the Auto Intercom button(s):

Steady green on = voice terminal is in group

Green off = voice terminal is not in group

	5	To	associate lines with the group, touch line button(s):
			Steady green		on	=	line is assigned to group
				Green	off	=	line is not assigned to group
	6	To	get a printout, dial #906 and wait for the beep.
	7 Touch Message.
	8 Go on to another procedure or leave administration mode.
PROGRAMMING	TO program a button for a Call Distribution group, label a button, enter
	programming mode, and follow these steps:
	1	Touch the button you want to program.
	2	Dial *91 plus a Group Call Distribution code (870 through 875 or a code
		assigned through Flexible Numbering).
	3	Program another feature, or leave programming mode.
HOW TO USE	To place an intercom call to a Call Distribution group:
	1 Touch Intercom-Voice			or Intercom-Ring.
	2	Lift	your handset or	touch	S p e a k e r p h o n e .
	3	Touch the button for the group or dial the appropriate code.
	4	When you hear a beep or when someone answers, begin speaking.

MERLIN II System Features 2-71