AT&T feature module 2 system manual Enter

Night Service with Outward Restriction The following procedure describes how to set up or change your password, list of emergency numbers, or Exclusion list.

1 Touch Message.

2To administer a password, dial # 309, then take one of these actions:

➤To create a new password or replace an existing password, dial any four digits (0 through 9).

To remove an existing password, touch Drop.

NOTE: Removing the password deactivates the Outward Restriction feature. To restore Outward Restriction, you need to create a new password.

3To administer emergency telephone numbers, dial #310, then take one of these actions for each number you want to add, change, or remove:

To add or change an emergency telephone number, dial the entry number (0 through 9) of the telephone number on the allowed list, then dial the number itself (maximum of 12 digits).

To remove an existing number, dial the entry number (0 through 9) of the telephone number on the allowed list, touch Drop, and touch

Enter.

4To assign voice terminals to the Night Service Exclusion list or remove them from this list, dial # 308, then touch the Auto Intercom button of each voice terminal until the light next to the button shows the appropriate code.

Green light on = voice terminal is assigned to the Exclusion list

Green light off = voice terminal is not assignd to the Exclusion list

5Go on to step 2 of another procedure or leave administration mode.

Night Service with Time Set Follow the steps below to administer Night Service with Time Set. If you want Night Service to stay on for a full day (a Sunday, for example), don‘t set a start time or a stop time for that day.

NOTE: If you have not set the MERLIN II system clock, follow the procedures in “Call Report” to set the time and date before you begin to administer Night Service with Time Set. FOllOW those steps whenever you need to reset the system clock, when the time changes, for example.

1 Touch Message.

2 For each day of the week in turn, set the time of day when you want Night Service to go on automatically. You must perform both steps a and b for each day.

a Dial the code for the day of the week for which you are setting a time.

Sunday = # 3110	Wednesday = # 3113	Friday =	#3115
Monday = # 3111	Thursday = #3114	Saturday	= #3116
Tuesday = #3112

2-120MERLIN II System Features