AT&T feature module 2 system manual 30Menu-Driven Administration Procedures

Administration Procedure

Call restrictions and allowed lists:

To assign outward and toll call restrictions to voice terminals:

NOTE: If you do not need to dial a toll prefix (0 or 1) to place a long distance call, perform steps 1 and 2 below.

If you use a toll prefix, just perform step 2 below.

1 To set lines to identify long distance calls by area code only

2 To assign call restrictions to voice terminals

To copy line assignments and call restriction assignments from one voice terminal to another

Do This

1Reach screen via [Lines], [TollType] .

2Touch line buttons:

Steady green on = toll calls detected by toll prefix only Green off = toll calls detected by area code or toll prefix

3Touch Conference to return to the administration menu.

1Reach screen via [Stations], [Restrct] .

2Touch Auto Intercom button for voice terminal.

3Touch [Enter] . The Speaker button lights as follows: Steady green on = all calls permitted (unrestricted)

Flashing green = local and intercom calls and calls to numbers on assigned lists permitted (toll call restriction)

Green off = intercom calls and calls to numbers on assigned lists permitted (outward call restriction)

4Touch the appropriate button for the restriction you want on this voice terminal:

[NoRestr] = unrestricted

[Local] = toll call restriction

[Intercom] = outward call restriction

5Repeat steps 2 through 4 for as many voice terminals you want to restrict.

6Touch Conference to return to the administration menu.

1Reach screen via [Stations], [Copy] .

2Touch Auto Intercom button for voice terminal you want to copy from .

3Touch [Enter].

4Touch Auto Intercom button for voice terminal that you want to copy to.

5Touch [Next] to select another voice terminal to copy to.

6Touch [Enter] to choose a new voice terminal to copy from.

7 Touch Conference to return to the administration menu.

3-30Menu-Driven Administration Procedures