AT&T feature module 2 Ringing-on-Transfer, Touch a line button, When you receive an outside call

PROGRAMMING	To disable or enable Ringing/Idle Line Preference, enter programming mode
	and follow these steps:
	1 Touch a line button.
	2 Dial *343 to enable Ringing/Idle Line Preference or *344 to disable it-
	3 Leave programming mode.
HOW TO USE	When you receive an outside call:
	1 Lift your handset or touch Speakerphone.
	If you have Ringing/Idle Line Preference, the MERLIN II system connects you to the
	ringing line.
	2 If you have dialed this feature, touch the line button for the incoming call.

Ringing-on-Transfer

DESCRIPTION	When someone within the MERLIN II system transfers a call, the person is
	automatically connected to Music-on-Hold, if the system has the feature.
	However, the system administrator may choose to administer the Ringing-
	on-Transfer feature so that the caller hears ringing instead,

CONSIDERATIONS

ADMINISTRATION

The system is factory-set to connect a person to Music-on-Hold when the person’s call is transferred.

To administer Ringing-on-Transfer or change from Music-on-Hold to Ringing- on-Transfer, enter administration mode and follow the appropriate procedures below.

With a MERLIN II System Display Console

1 From the administration menu, touch these buttons: [More], [Options],

[More] , [Feedback] .

2 Touch [Music] , or [Ringback]

3 Touch Conference to return to the administration menu, or leave

administration mode.

With a BIS-34D Console

1 Touch Message.

2 Dial #314, then perform one of the following operations:

If you want Music-on-Hold, dial 0.

If you want Ringing-on-Transfer, dial 1.

MERLIN II System Features 2-139