AT&T feature module 2 system manual Assigning Voice Terminals Dial Access to Line Pools

eTouch [Enter].

You hear a 2-beep signal to let you know that the copy procedure is complete.

f Repeat steps b through e for each voice terminal for which you want to copy line assignments.

g Touch [Exit] to return to the Stations screen.

5 Touch [LinePool] and repeat steps 2 through 4 to assign additional lines or pools to buttons.

6 Touch Conference to return to the administration menu, or leave administration mode.

Assigning Voice Terminals Dial Access to Line Pools

1To assign Dial Access to Line Pools to voice terminals, touch these buttons from the administration menu: [Stations] , [DailAcc] .

2Touch the Auto Intercom button for the voice terminal.

3Touch [Enter] .

NOTE: If the voice terminal is being used, the message, “station busy - please wait, ” shows on your display. You must either wait until the station becomes available or try again later.

4Touch the line buttons until the correct code shows:

Steady green on = voice terminal has Dial Access to the pool containing the line

Green off = voice terminal doesn‘t have Dial Access to the pool containing the line

If you want to duplicate the Dial Access to Line Pool assignments on another voice terminal, use the following shortcut:

NOTE: Be aware that when you copy line assignments, you also copy call restrictions and allowed-list permissions. Be sure you want the two voice terminals to be identical in these respects before using this Copy procedure.

a Touch [Copy] .

b In response to the prompt, touch the Auto Intercom button of the station you are copying from.

C Touch [Enter] .

d In response to the prompt, touch the Auto Intercom button of the station you are copying to.

e Touch [Enter].

You hear a 2-beep signal to let you know that the copy procedure is complete.

f Repeat steps b through e for each voice terminal for which you want to copy line assignments.

g Touch [Exit] to return to the Stations screen.

5Touch [DialAcc] and repeat steps 2 through 4 to assign Dial Access to additional voice terminals.

6Touch Conference to return to the administration menu, or leave administration mode.

MERLIN II System Features 2-95