AT&T feature module 2 Timer Functions 930a 0000 Start Stop Reset, Alarm Functions 930a 1030a

Setting the Alarm

8 Use the Month and Date arrow keys to set the date. (The arrows pointing up raise the numbers, such as 11-04 to 12-04 or 11-04 to 11-05; the arrows pointing down lower the numbers, such as 11-04 to 10-04 or 11-04

to 11-03.)

9 Touch EXIT to return to the Clock Set Functions display.

10 Touch EXIT again to return to the Clock Functions display.

11 If you want to leave the Clock Functions display and return to the normal call-handling display, touch Clock Functions.

Using the Timer When you need to time the length of an individual call, use the Timer feature on your console to display a running 10-hour stopwatch.

1 At the Clock Functions display, touch Timer.

You see the following Timer Functions display:

Timer Functions		9:30a	00:00
Start	stop	Reset	EXIT
❑	❑	❑ ❑	❑

2 To start the timer from 00:00, touch Start.

3 To return the timer to 00:00 and start the timer again, touch Reset.

4 Touch Stop to stop the timer.

5 Touch EXIT to return to the Clock Functions display.

6 If you want to leave the Clock Functions display and return to the normal call-handling display, touch Clock Functions.

You may need to use an alarm to remind you, for instance, that you have a meeting at a specified time. In order to use the alarm feature on your console, you must set the alarm and then activate it.

1 At the Clock Functions display, touch Alarm.

You see the following Alarm Functions display:

	Alarm Functions			9:30a	A>	10:30a
Alrm On Alrm O f f				A l r m	S e t	E X I T
	❑	❑	❑	❑		❑

2 To set the alarm, touch Alrm Set.

You see the following Alarm Set Functions display:

Alarm Set Functions

Hour Hour Min Min EXIT

❑ ❑ ❑ ❑ ❑

2-54MERLIN II System Features