AT&T feature module 2 System Renumbering, To individual voice terminals, Touch Renumber

System Renumbering

DESCRIPTION	At some point, you may need to change modules in the control unit. If you
	replace a module with one of a different type, you must readminister the
	system to reassign numbers to lines and stations. Changing station modules
	may also require readministration of features that are related to analog
	stations only, such as attendant positions and the Voice Announcement to
	Busy Voice Terminal feature.
	For more information about different types of modules, see “Control Unit
	Modules” in “Accessory Equipment. ”
CONSIDERATIONS	If you add a line or station module in the control unit, renumbering is not
	necessary. However, you will need to assign the additional lines and stations
	to individual voice terminals.
ADMINISTRATION	To renumber the system, enter administration mode and follow these steps:
	With a MERLIN II System Display Console
	1 From the administration menu, touch	[System], [More] .
	2 Touch [Renumber] .
	You see a message showing that the system is	performing renumbering.

3 When the administration menu appears, go on to another procedure, or leave administration mode.

With a BIS-34D Console

1 Touch Message.

2 Dial #299.

3 Wait for the lights next to Adm Pool, Adm Tel, Message, and Speaker to begin flashing, which indicates that the renumbering process is complete.

4 Go on to another procedure, or leave administration mode.

2-152MERLIN II System Features