AT&T feature module 2 system manual M p O n, Touch Speaker Touch Adm Tel, Touch Recall

Green lights indicate that the

C a m p O n

DESCRIPTION

With a BIS-34D Console

NOTE: If you must dial 0 or 1 before dialing a long distance call, begin the following procedure with step 5. If you do not dial 0 or 1 before dialing a long distance call, begin with step 1.

1 Touch Speaker.

2 Check the lights next to your line buttons.

system uses a toll prefix to detect a long distance call placed on this line. If you don’t dial toll prefixes in your area, no green lights should be on.

3 Touch each line button until the light next to it shows the appropriate code:

Steady green on = system uses toll prefixes to defect long distance calls Green light off = system detects long distance calls by urea code only

4 Touch Speaker.

5 Touch Adm Tel.

6 Touch the Auto Intercom button of the voice terminal you want to restrict.

7 Touch Speaker until the green light beside it shows the kind of call restriction you want the voice terminal to have.

Steady green light on = Unrestricted (all calls permitted)

Flashing green light = Toll restricted (local and intercom calls only)

Green light off = Outward restricted (intercom calls only).

8 Repeats steps 6 and 7 for each voice terminal you want to restrict.

9 If there are voice terminals in the system that will have the same call restrictions, use the following shortcut to give another voice terminal the same call restrictions as one you have already set up. However, be aware that when you copy call restrictions, you also copy line and line pool assignments and Dial Access to Line Pools from the original voice terminal.

a Touch the Auto Intercom button of the new voice terminal.

b Touch Recall.

The red light next to Adm Tel flashes.

c Touch the Auto Intercom button of the original voice terminal.

The red light stops flashing when the copy is complete.

10 Touch Adm Tel and go on to another procedure, or leave administration mode.

You can use the Camp On feature to transfer an outside call to a busy voice terminal. The call stays on hold until the voice terminal becomes available, then rings through automatically. Camp On makes it unnecessary to place the call on hold, recheck the busy voice terminal until it becomes available, and then transfer the call.

MERLIN II System Features 2-35