AT&T feature module 2 From one day to the next, Voice terminal, Reminder is cancelled

CONSIDERATIONS	● To use Reminder Service, the MERLIN II system clock must be set.
	● Reminder Service must be reset each time it is used. It doesn’t carry over
		from one day to the next.
	● At any given time, only one reminder time can be in effect for a particular
		voice terminal.
	● If the voice terminal is busy when the system sends the reminder, the
		reminder is cancelled.
	● Reminders override the Do Not Disturb feature. They cannot be picked
		up and aren’t sent to covering voice terminals.
ADMINISTRATION	To administer a reminder Cancel-All time, enter administration mode and
	follow the appropriate procedure below.
	With a MERLIN II System Display Console
	1 From the		administration menu, touch these buttons: [More], [Options] ,
		[More],	[More], [More], [RmdrSvc].
	2	Take the	appropriate action:
		To set a time, dial a 4-digit Cancel-All reminder time using the 24-hour
		format (0000 through 2359)
		To remove an existing time, touch Drop.
	3 Touch [Enter] .
	4	Touch Conference to return to the administration menu, or leave
		administration mode.
	With a BIS-34D Console
	1 Touch Message.
	2	Dial # 333.
	3	To set or change a time for Cancel-All, take the appropriate action:
		To set a time, dial the 4-digit Cancel-All reminder time using the
		24-hour format (0000 through 2359).
		To remove a time administered previously, touch Drop.
	4 Touch Message and go on to another procedure, or leave administration
		mode.
PROGRAMMING	Users and attendants can program Reminder Set and Reminder Cancel
	buttons.
	To program Reminder buttons, label them appropriately and do as follows:
	1	Enter programming mode.
	2	Touch the button you want to program.
	3	Dial *28 for Reminder Set or *27 for Reminder Cancel.
	4	Leave programming mode.

2-136MERLIN II System Features