AT&T feature module 2 system manual Intercom Dial Tone, Match the CO line dial tone

Intercom Dial Tone

DESCRIPTION	There are two types of dial tones: The MERLIN system internal dial tone and
	the CO line dial tone. Some modems and software applications (Voice Mail
	Service, for example) will not recognize the internal dial tone of the MERLIN
	system. When a MERLIN system station is off-hook, the dial tone may
	prevent some of these services from entering the system. The Intercom Dial
	Tone feature allows you to change the internal MERLIN system dial tone to
	match the CO line dial tone.

CONSIDERATIONS

ADMINISTRATION

If any software applications or moderns used by the system do not recognize the MERLIN II system internal dial tone, you will have to administer the system so that the CO line dial tone will be detected.

If you are running software applications or using modems that do not recognize the internal MERLIN system dial tone, follow the appropriate procedure below.

With a MERLIN II System Display Console

To change the dial tone using a MERLIN II System Display Console:

1 From the system menu, touch [More], [Options], [More], [More], [More] .

2 Touch [ICMdial] .

3 Take the appropriate action:

Touch [Internl] to provide the MERLIN II intercom dial tone, or

Touch [Externl] to provide the CO line dial tone.

With a BIS-34D Console

To set the dial tone using a BIS-34D Console:

1 Touch Message.

2 Dial # 335

3 Take the appropriate action:

Touch 0 to provide the MERLIN intercom dial tone, or

Touch 1 to provide the CO line dial tone.

MERLIN II System Features 2-77