AT&T feature module 2 system manual System Size

System Size

DESCRIPTION	The MERLIN II system can be set for two different sizes: small and large.
	The small setting is for systems administered for eight or fewer lines and
	20 or fewer voice terminals. With small systems, the administrator and
	attendants typically use a BIS-34D voice terminal with display as a
	console.
	The large setting is for systems administered for more than eight lines or
	more than 20 voice terminals. This size system can accommodate up to
	56 lines and 72 voice terminals. The administrator and attendants use a
	MERLIN II System Display Console.
CONSIDERATIONS	If the administrator changes the system size designation from small to large,
	or vice versa, on a running system, the line and feature assignments change
	on all attendant consoles.
ADMINISTRATION	To specify system size, enter administration mode and follow the
	appropriate procedure, below.
	With a MERLIN II System Display Console
	1 From	the administration	menu, touch [System] , [Size] .
	2 Touch	[Small] or [Large] as	appropriate for your system.
	3 Touch Conference to return to the administration menu, or leave
	administration mode.

With a BIS-34D Console

1	Touch Message.
2	Dial #201 and wait for the 2-beep signal to begin.
3	Dial the appropriate code:
	For a small system, dial 0.
	For a large system, dial 1.
4	Wait for the lights next to Adm Pool, Adm Tel, Message, and Speaker to
	flash. At this signal, go on to another procedure or leave administration
	mode.

MERLIN II System Features 2-153