AT&T feature module 2 system manual Conference twice, Menu Selection Screens, Data Entry Screens

2 Enter administration mode by sliding the T/P switch to P and touching

Conference twice.

The administration menu appears on the display:

Administration: Please make a selection

System FlexNum Lines Stations More

3 Touch the key for one of the administration options shown on the screen or touch [More] to see the rest of the options available.

4 Follow the screen prompts and the labels under the keys to change basic system settings or administer options, as explained below. To return to the administration menu at any time, touch Conference once.

There are two basic types of screens, menu selection and data entry screens. The other screens give you information, such as “System is Re-starting . . .” General instructions for using the two basic types of screens follow.

Menu Selection Screens

On menu screens like the second Stations screen, below, you touch keys to select a particular option.

Stations: Please make a selection

Account BIS/HAFl Pagezn GrpCall More

I

The screen prompts you to make a selection by touching the appropriate key. In some cases, this brings up a new screen. In others, like the screen shown above, a light goes on next to the key you touched. The lights next to Auto Intercom buttons and line buttons show the status of the feature that the key represents.

You can perform the following procedures on this screen:

Designate stations for Forced Account Code Entry

Identify voice terminals as BIS/HFAI or membrane button models

Establish or update Group Page groups

Establish or update Call Distribution groups

Data Entry Screens

On data entry screens like the Flexible Numbering screen, below, you use the dialpad to record data such as the new station number.

Line	801 Enter new line number
		I
38

2-110MERLIN II System Features