AT&T feature module 2 system manual To Give Voice Terminals Access to Allowed Lists

To Give Voice Terminals Access to Allowed Lists

1 From the administration menu, touch [More], [Tables], [More], [AllowTo] .

2Dial the list number (0 through 7).

3Touch [Enter] .

4Touch the Auto Intercom button(s) until the appropriate code shows:

Steady green on = voice terminal has access to the numbers on the list

Green off = voice terminal doesn‘t have access to the numbers on the list

5Touch [AllowTo] and repeat steps 2 and 3 to give voice terminals access to other lists.

6Touch Conference to return to the administration menu, or leave administration mode.

To Get Printouts

1 From the administration menu, touch [More], [More], [Print], [More] .

2Take the appropriate action:

Touch [AlwList] if you want a printout of allowed lists. You must then select which list (0-7) and touch [Enter] .

Touch [AllowTo] if you want a printout of voice terminal access to allowed lists.

3Touch the button for a different print procedure or touch Conference to return to the administration menu.

With a BIS-34D Console

To Administer an Allowed List

1Touch Message.

2Dial #5.

3Dial the list number (0 through 7), then the entry number (0 through 9).

4Dial the entry.

5Take the appropriate action:

To add more entries to the same list or to add entries to a different list, repeat steps 2 through 4.

To remove an entry from a list, perform steps 2 and 3, then touch Drop.

6Go on to step 2 of the procedure below, if you want to assign voice terminals access to allowed lists, or leave administration mode.

To Give Voice Terminals Access to Allowed Lists

1Touch Message.

2Dial #4.

3Dial the number of the list (0 through 7).

Green lights come on next to the Auto Intercom buttons for all voice terminals that can access the allowed list.

MERLIN II System Features 2-7