AT&T feature module 2 system manual Touch Speakerphone, Touch Microphone again

CONSIDERATIONS

HOW TO USE

●Be sure you are using the correct model for the voice terminal, as shown below.

Model S101A (silver) is used with digital voice terminals only.

Model S102A (black) is used with analog voice terminals only.

●The HFU can be used with the 10-button, BIS-10, BIS-22, 34-button, 34-button deluxe, SP-34, SP-34D, BIS-34, and BIS-34D analog voice terminals. When you use the HFU with a 7406 digital voice terminal, you must use a local power unit.

●If you program an Auto Answer-Intercom button, you can have the Hands-Free Unit go on automatically when you receive intercom calls. (See “Auto Answer-Intercom.”)

To use your Hands-Free Unit to place a call:

1Without lifting your handset, touch Speakerphone.

The speakerphone and microphone lights come on, and you hear the dial tone.

2Dial the number.

3When the person answers, begin the conversation.

You can slide the volume control lever on the front of the Hands-Free Unit to lower or raise the volume of the other person’s voice.

To answer an outside call using a Hands-Free Unit:

1Touch Speakerphone.

The speakerphone and microphone lights go on,

2Begin the conversation.

To disconnect a call:

1When you are finished with the call, touch Speakerphone.

The speakerphone and microphone lights go off.

If you want to prevent the other person on the call from listening while you speak with someone in your office:

1 Touch Microphone.

The microphone light goes off.

When you are ready to speak again with the person:

1 Touch Microphone again.

The microphone light goes on.

2-180MERLIN II System Features