AT&T feature module 2 system manual Identifying Toll Types for Selected Lines

Green off =

With a MERLIN II System Display Console

NOTE: If a toll prefix is required on all your lines, skip the procedure below and go on to “Administering Call Restrictions. ”

Identifying Toll Types for Selected Lines

1 From the administration menu, touch [Lines], [TollType] .

2 Touch the line buttons until the lights show the appropriate code:

Steady green on = toll calls detected by toll prefix only

Green off = toll calls detected by area code or toll prefix

3 Touch Conference to return to the administration menu and go on to the next procedure.

Administering Call Restrictions

1 From the administration menu, touch [Stations], [Restrct].

2 Touch the Auto Intercom button for the voice terminal that you want to restrict.

3 Touch [Enter] .

4 Touch the appropriate key for the restriction you want on this voice terminal:

[NoRestr] = unrestricted

[Local] = toll call restriction

[Intercom] = outward call restriction

As you touch the appropriate key, the Speaker button shows one of these codes:

Steady green on = all calls permitted (unrestricted)

Flashing green = local and intercom calls and calls to numbers on assigned lists permitted (toll call restriction)

intercom calls and calls to numbers on assigned lists permitted (outward call restriction)

5 Repeat steps 2 through 4 for each voice terminal you want to restrict.

6 Touch Conference to return to the administration menu, or leave administration mode.

Copying Line and Call Restriction Assignments

1If you want to copy line assignments and Call Restriction assignments from one voice terminal to another, touch [Stations], [Copy] .

2Touch the Auto Intercom button for the voice terminal you copy to copy from.

3Touch [Enter] .

4Touch the Auto Intercom button for the voice terminal that you want to copy to.

5Touch [Next] to select another voice terminal to copy to.

6Touch [Enter] to choose a new voice terminal to copy from.

7Touch Conference to return to the administration menu, or leave administration mode.

2-34MERLIN II System Features