AT&T feature module 2 system manual Do This Touch Message

Administration Procedure

Direct Inward System Access:

To assign lines for DISA

To specify a password for DISA users

To set up DISA outward restriction

To get a printout ofDISA options

Disconnect interval for held calls

Extended Station Status:

To specify the ESS mode

To put consoles in and out of ESS Display mode

Do This

1 Touch Message.

2 Dial # 323.

3 Touch line button:

Steady green on = line used for DISA

Green off = line not used for DISA

4 Touch Message.

1 Touch Message.

2 Dial #324.

3 Dial a 4-digit password or touch Drop.

4 Touch Message.

1 Touch Message.

2 Dial #325.

3 Dial 0 for outward restriction or 1 for no restriction. 4 Touch Message.

1 Touch Message.

2 Dial #905 and wait for beep.

3 Touch Message.

1 Touch Message.

2 Dial # 303.

3 Touch line buttons:

Steady green on = line drops held call on long (450 millisecond) signal (default)

Green off = line drops held call on short (50 millisecond) signal

4 Touch Message.

1 Touch Message.

2 Dial #329.

3 Dial 0 for Hotel/Motel or 1 for CMS mode.

4 Touch Message.

1 Touch Message.

2 Dial #330.

3 Touch Auto Intercom button(s):

Steady green on = console in display mode

Green light flashing = console not indisplay mode 4 Touch Message.

Button Code Administration Procedures 3-11