AT&T feature module 2 system manual Call Coverage, Caller ID, Touch Time/Timer

Call Coverage

If you have a Call Coverage button programmed for another person’s voice terminal, calls ring at your voice terminal when that person is away from his or her desk. The display screen shows you the intercom number of the person whose calls you are covering.

> 1 6 r

Caller ID

When you receive an intercom call, the caller’s intercom number or an administered station label, such as the person’s name, appears on the screen.

2 3 - I c o m

Clock/Date, Timer, and Alarm (The BIS-34D and Sp-34D Voice Terminals)

The time-keeping features of the display unit allow you to set an alarm as well as the clock and date.

To set the time, day, and date on the display screen of a BIS-34D or SP-34D voice terminal:

1 Touch Set until the item you want to change flashes.

2 Touch Fwd or Rev to advance or reverse the time, day or date.

3 When you are finished, touch Exit.

To set the alarm on the display of a BIS-34D or SP-34D voice terminal (for example, when you want a reminder that you have a meeting in five minutes) and permit timer operation:

1 Touch Set until the item you want to change flashes.

2 Touch Fwd or Rev to advance or reverse the time until the display shows the time you want the alarm to sound.

3 When you are finished, touch Exit.

( ALARM: Off 12:00 p )

If you wvant to return to the Time/Timer display (see the procedures for using the Time/Timer display below),

1 Touch Time/Timer.

MERLIN II System Features 2-51