AT&T feature module 2 To start the timer for calls you need to time, Stop, Touch Clock Functions

To start the timer for calls you need to time:

1Touch Time/Timer.

2Touch Start to reset the Timer to 00:00 and start the Timer.

3When you are finished using the Timer, touch Stop.

When you want to return to the Clock/Calendar display, which shows the time, day, and date:

1 Touch Time/Timer.

Clock/Date, Timer, and Alarm (The MERLIN II System Display Console)

The time-keeping features on the display console allow you to set the clock and date, an alarm, and a timer. To help you do this, there are five buttons below the display screen. You press Clock Functions to get into this mode.

As you follow the procedures for setting the time-keeping features, the second line of the display will show you the function of each button. Touch the button below the label you want to use for the procedure. In the example shown below, you would touch the button below the label, Start, if you want to start the timer, or touch the button below the label, Stop, when you want to stop the timer.

Timer Functions		9:30a	00:00
Start	stop	Reset	EXIT
❑	❑ ❑	❑	❑

Setting the Clock and Date When you are not using your display to help you with programming or administration, or testing your console, the display shows the time and date on the first line. (This is the screen that you will usually see. )

9 : 1 4 a T u e 1 1 - 0 4

❑ ❑ ❑ ❑ ❑

You can reset the time, day, and date on your display by following these procedures.

1 Touch Clock Functions.

You see the following Clock Functions display:

Clock Functions		9:30a Tue 11-04
Timer	Alarm	Set
❑	❑	❑ ❑ ❑

2-52MERLIN II System Features