AT&T feature module 2 system manual Centralized Programming

HOW TO USE	Follow these steps to use the Camp On feature:
	1 If the voice terminal to which you are transferring a call is busy and the
	caller is willing to wait, touch Camp On or dial #57.
	2 Touch the Auto Intercom button or dial the intercom number of the voice
	terminal to which you are transferring the call.
	NOTE: You must enter this information within your system’s transfer
	return interval or Camp On will be denied.
	How are you notified of a Camp On call depends on what kind of telephone
	you have.
	● If you have a MERLIN II system voice terminal, an abbreviated ring tells
	you that a Camp On call is waiting,
	● If you have a basic telephone, you won’t be notified that a Camp On call
	is waiting. The Camp On call rings through automatically, however, as
	soon as your telephone becomes available.

Centralized	Programming
DESCRIPTION	The Centralized Programming feature lets administrators program features
	onto individual voice terminals directly from the administrator/attendant
	console. This means you don’t have to go to each voice terminal to do the
	programming, although you do need to make sure the feature buttons on the
	voice terminal are labeled correctly.
CONSIDERATIONS	● If you use Centralized Programming to assign optional features to a
	7406 voice terminal, keep in mind that buttons on this type of voice
	terminal are in different positions than they are on the analog voice
	terminals. Figures 2-1 and 2-2 are diagrams of the buttons on the analog
	administrator/attendant console and the corresponding buttons on the
	digital 7406 voice terminal.
	● The voice terminal that you are programming must be idle. If the
	voice terminal is busy or in program mode, you hear a beep at the
	administrator/attendant console. You cannot program the voice terminal
	until it becomes idle.
	● Once you have begun Centralized Programming, the voice terminal that
	you are programming beeps every five seconds to remind the user that he
	or she cannot use the terminal until you have completed the programming
	from your console. Any callers get a busy signal.
ADMINISTRATION	To program features onto a voice terminal the administrator/attendant
	console, enter administration mode and follow the appropriate procedure
	below.

MERLIN II System Features 2-37