AT&T feature module 2 system manual Programming

ADMINISTRATION

PROGRAMMING

●The Forced Account Code Entry feature applies to outgoing calls only. You may use the standard Account Code Entry feature to associate an account code with an incoming call.

●Forced Account Code Entry can be administered for basic Touch-Tone telephones in all systems except systems administered for- behind-switch operation. People who have basic telephones administered for Forced Account Code Entry follow a different procedure for placing outside calls than do people with MERLIN II system voice terminals. The feature cannot be used with rotary telephones.

To assign the Forced Account Code Entry feature to voice terminals, enter administration mode and follow the appropriate procedure below:

With a MERLIN II System Display Console

1 From the administration menu, touch these buttons: [Stations], [More],

[Account] .

2 Touch the Auto Intercom button of each voice terminal for which you want to assign or remove this feature until the light next to the button shows the appropriate code.

Green light on = voice terminal has Forced Account Code Entry

Green light off = voice terminal doesn‘t have Forced Account Code Entry

3 Touch Conference to return to the administration menu, or leave

administration mode.

With a BIS-34D Console

To assign the Forced Account Code Entry feature to voice terminals:

1Touch Message.

2Dial #319.

3Touch the Auto Intercom button of each voice terminal for which you want to assign or remove this feature until the light next to the button shows the appropriate code.

Green light on = voice terminal has Forced Account Code Entry

Green light off = voice terminal doesn‘t have Forced Account Code Entry

4Touch Message and go on to another procedure, or leave administration mode.

To program an Account Code Entry button, label a button with lights, enter programming mode, and follow these steps:

1 Touch the button you want to program.

2 Dial *82.

3 Program another feature, or leave programming mode.

2-68MERLIN II System Features